装载机气压表压力上升缓慢怎么办？

装载机有时候会出现气压表压力上升缓慢的现象，对于这个问题，很多装载机操作者都不知道如何处理，下面永保机械的专家就给大家仔细总结一下。
Loader sometimes appear pressure rise slow phenomenon, for this problem, a lot of loader operators do not know how to deal with, the following is the expert on the mechanical and maintenance of the machinery will give you a careful summary. 

首先应排除装载机管路漏气，检查气泵工作状态是否正常。将装载机气泵出气管拆下，我们可以用大拇指压紧气管出气口，若排气压力低，说明气泵有故障。若装载机气泵工作状态良好，再检查油水分离器放油螺塞或调压阀，避免旁通，通过检查排除故障。最后再检查装载机三通接头中的两个单向阀，单向阀卡滞会造成储气筒不能进气或进气缓慢。
First of all should be excluded from the loader pipeline leak, check whether the normal work state of pump. The loader pump outlet tube removed, we can use the thumb pressing the tracheal outlet, if the exhaust pressure is low,indicating pump failure. If the loader pump in good working condition, and then check the oil-water separator drain plug or pressure regulating valve, to avoid bypass, by checking the troubleshooting. Finally, check the two one-way valve loader three pass joint of the one-way valve will cause the cylinder can not block intake or intake slowly.