装载机厂家分析山东装载机的过热现象

装载机厂家 http://www.sdyongbao.com/发现，现在很多的地方都在使用山东装载机，有些工作是离不开装载机的，那我们在使用的时候会发现一些问题，我们在使用的时候突然发现装载机过热现象的原因是什么？The loader manufacturers found that now many places are using Shandong loader, some work is cannot do without loader, then we will find some problems in the use of the time, we suddenly found that when in use, what is the reason for the loader overheat?

现在我们就来了解下，山东装载机适用在中小建筑施工，工地需要大量的混泥土。装载机出现过热现象，通常表现在发动机、变矩器、驱动桥和制动器总成上。在正常情况下，装载机工作多长时间，这些总成均应保持一定的工作温度。Now we come to understand that the Shandong loader suitable for small and medium construction, the site requires a lot of mixed soil. The overload of the loader, usually on the engine, torque converter, drive axle and brake assembly. Under normal circumstances, the loader to work for a long time, these assembly should maintain a certain working temperature.

除了发动机变速器油底外，若用手触摸时，会感到烫痛难忍，即表明该处过热。例如发动机过热，说明冷却系统有故障，会引起发动机的恶性事故；驱动桥过热多系缺少润滑油所致，如果不能及时排除，将引起齿轮及轴承等件磨损，变矩器及变速器的液压油过热，会引起离合器摩擦片磨损及变形等，因此对待过热症状，必须引起重视，查找原因，予以排除。In addition to the engine gearbox oil bottom, if touched, will feel hot painful, namely that the overheating. For example, the engine overheating, cooling system failure, accidents will cause the engine overheating; driving axle system caused by lack of lubrication, if not promptly removed, will cause the gear and bearing wear parts, hydraulic oil overheating torque converter and transmission, will cause the clutch friction wear and deformation. Therefore, overheating symptoms, we must pay attention to, find out the reasons, be excluded.

换装不同的辅助工作装置还可进行推土、起重和其他物料如木材的装卸作业。在道路、特别是在高等级公路施工中，山东装载机用于路基工程的填挖、沥青混合料和水泥混凝土料场的集料与装料等作业。Different auxiliary equipment outfit can also be bulldozing, lifting and other materials such as wood handling operations. On the road, especially in high grade highway construction in Shandong, the loader used for filling digging, asphalt and concrete aggregate materials market and charging operations such as subgrade engineering.

通过以上装载机厂家的详细介绍，我们对山东装载机过热现象有所了解，希望以上的信息能帮助我们，有问题可以随时咨询我们。Through the detailed introduction of the loader manufacturers, we have some understanding of the phenomenon of overheating in Shandong loader, hope that the above information can help us, we can ask questions at any time.